Hikvision 2MP Bullet Camera DS-2CD1T27G2H-LIUF/SL
A 2 MP Hikvision 1-Series bullet with hybrid light imaging for colour after dark and /SL active deterrence, a strobe and audible alarm on detection. On a bullet the picture is the easy part — the bracket, the cable entry and the gland decide the install. Datasheet checks and project pricing on 16454.
3,469 EGP
Out of stock
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
-
Warranty 1 year
-
Free 14-Day returns

Description
The DS-2CD1T27G2H-LIUF/SL is Hikvision’s 2 MP 1-Series bullet with both halves of the deterrence package fitted. The LIUF designation marks hybrid light imaging, so the camera holds colour after dark rather than dropping to monochrome, and the /SL suffix adds an active response — a strobe and an audible alarm that fire on detection rather than quietly filing an event nobody reads until morning.
On a tender that usually means a boundary: a yard gate, a compound wall, the blind side of a warehouse. Which is where this camera stops being an imaging decision and becomes a mechanical one, because on a bullet the picture is the easy part — the bracket is the job.
Where it earns its place on a site
A bullet is a cantilevered mass on an arm, and what goes wrong on the day goes wrong at that interface: the fixings will not bite, the surface turns out to be cladding over nothing, or the cable was pulled to the wrong point. None of that appears in the imaging section of a datasheet. All of it appears in your labour cost.
It earns its place on exposed runs a dome covers badly — perimeters, fence lines, driveways. Budget the /SL behaviour honestly too: a siren on a residential boundary is a different conversation with the client than the same unit in an industrial yard, so agree trigger rules at commissioning.
Before you order — three things to confirm
- Mounting surface: establish what the camera actually fixes into — brick, block, precast, steel, or a rendered facade the client will not let you drill. Tenant fit-outs and protected frontages routinely rule out through-fixings, and a pole mount rather than a wall bracket changes the parts list.
- Cable route: decide before the cable is pulled whether it leaves through the base into the wall or out of the side into surface trunking. Get it wrong and you are chasing a wall you were not asked to chase. Price a junction box if the run is surface.
- Weather sealing at the gland: the housing rating means nothing if the RJ45 tail sits in open air. Plan a sealed gland or enclosure at the joint, and assume an Egyptian summer punishes a taped joint inside one season.
Technical specifications
- Type: fixed bullet network (IP) camera
- Resolution class: 2 MP
- Range: Hikvision 1-Series
- Imaging: hybrid light — the LIUF designation covers colour imaging in low light
- Active deterrence: /SL — strobe light and audible alarm on detection
- Everything else — supplement light distance, lens focal length, protection rating, power, storage and dimensions: full manufacturer datasheet available on request — call 16454
Compatibility
A standard Hikvision IP camera on the same recorder, switch and client software estate as the rest of the range. Before committing it to a design, check that your NVR firmware exposes the /SL event linkage in its own interface and not only through the camera’s web page.
What’s in the box
We do not list accessories we cannot guarantee. Brackets, junction boxes, glands and power supplies vary by revision and batch, and none should be assumed present. Contents for the current revision are confirmed on the order — tell us your mounting arrangement and we will say what has to be added.
Common questions on this model
Does the cable exit through the rear base or the side of the housing?
This varies by revision and we will not guess it. The answer decides whether you chase the wall or fit a junction box. Tell us the revision you are buying and we will confirm it against the datasheet before cable is pulled.
How does this differ from the DS-2CD1027 in the same family?
The T in DS-2CD1T27 marks a separate housing within the same range — two mechanical builds under one series. We confirm the mounting difference from the datasheet rather than assert it from the part number, so if your bracket stock is standardised on one, ask before you substitute.
Can it go on a pole or fence post rather than a wall?
Often it has to on a perimeter, but pole mounting is an adaptor question rather than a camera question. Tell us the pole diameter and whether the cable runs inside it, and we will spec the mount.
Every DS-2CD1T27G2H-LIUF/SL we supply is genuine Hikvision stock with the official one-year manufacturer warranty, delivered across Egypt. For project quantities, mounting hardware, or a datasheet check before you commit to a bracket schedule, call 16454.






Reviews
Clear filtersThere are no reviews yet.