Hikvision Value 1801 Mifare Card Reader with Keypad DS-K1801MK

The DS-K1801MK is a Hikvision Value 1801 Mifare Card Reader with Keypad that connects to an access controller and reads the credential at the door.

• M1/ EM card reader
• PC+ABS material shell
• Built-in audible beeper
• Wiegand interface
• IP65

Where it fits

Doors run by a Hikvision access controller: entry readers, exit readers on two-way doors, and rooms that need a second factor such as a PIN or fingerprint.

Where it is the wrong choice: a stand-alone door with no controller — a terminal with built-in control fits better.

Before you order — three things to confirm

• Card type. Confirm which cards your site uses (EM 125 kHz, Mifare 13.56 MHz, DESFire) and match the reader.
• Controller interface. Confirm the controller accepts Wiegand or RS-485 as listed in the specs.
• Mounting. Check indoor or outdoor mounting and the protection rating in the specs.

Technical specifications

• Manufacturer: Hikvision
• Model: DS-K1801MK
• Wiegand: 1, W26/W34
• Card type: EM card;M1 card
• Power supply: 12 VDC, 0.15 A
• Power consumption: ≤ 1.6 W
• Working temperature: -20 °C to 65 °C (-4 °F to 149 °F)
• Working humidity: 10% to 90% (no condensing)
• Dimensions: 87 mm × 87 mm × 13.3 mm (3.43″ × 3.43″ × 0.52″)
• Keypad: N/A/12 Keys(0 to 9,*,#)
• Buzzer: support

Figures from Hikvision’s published datasheet. We confirm the revision in stock when we quote.

Common questions

Does it work on its own?
No — a reader sends the credential to an access controller, which decides and opens the door.

Which cards does it read?
See the card-type lines in the specifications; we match cards to the reader when we quote.

Genuine stock from the authorized Hikvision agent in Egypt, official warranty of 1 to 5 years depending on the product, delivery across Egypt, and professional installation in Cairo & Giza, priced after a site assessment. For project quantities, installation or a site review, call 16454.