Hikvision 4-ch PoE 1U K Series AcuSense 4K NVR DS-7604NXI-K1/4P

Hikvision 4-ch PoE 1U K Series AcuSense 4K NVR DS-7604NXI-K1/4P

Four channels, one drive bay and four built-in PoE ports, so a small shop, clinic or flat needs no separate switch in the cupboard. Those ports are part of the chassis and cannot be added to, so confirm four is a final number before ordering the DS-7604NXI-K1/4P. Call 16454.

6,296 EGP

In stock

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

  • Warranty 1 year
  • Free 14-Day returns
Buy now pay later payment options at Speed4Trading Egypt

Description

The Hikvision DS-7604NXI-K1/4P is a four-channel AcuSense recorder with the switch already inside it: four built-in PoE ports, one drive bay, 4K, nothing else to mount. On a flat, a small shop or a single-surgery clinic that is the neatest answer available: one box in the cupboard, not a recorder plus a switch.

Those four ports are not an accessory, though. They are part of the chassis, and their number is fixed for the life of the unit — which is the argument for this recorder and against it in one sentence.

Where it earns its place on a job

Specify the /4P where the camera count has been decided rather than estimated: four positions, walked and agreed with the client, all within reach of one cupboard. On that job it takes a line item and a socket out of the quote.

The failure case is commercial, not technical. When the client asks for a fifth camera there is no port to add. The options are a switch standing beside the recorder — the extra box this unit was chosen to avoid — or a bigger recorder, meaning you pull out a working one and re-commission. A port you cannot add later is a decision you make once, so buy the all-in-one when four is a final number, and something larger when four is only the number for now.

Before you order — three things to confirm

  • Is four a final number or a starting number? Ask the client where the next camera would go if there were one. If they can answer, four is a starting number and this is the wrong box.
  • Where the recorder sits decides every cable run. Power leaves from the recorder, so all four runs terminate at it and there is no mid-building switch position to shorten the awkward one. Fix its location against all four positions first.
  • Specify the drive against the retention promised. One bay, and the drive is chosen to the recording days you have quoted at your camera resolutions. Send us the retention target and camera models and we will confirm what it supports.

Technical specifications

  • Hikvision K series AcuSense network video recorder, 1U chassis, model DS-7604NXI-K1/4P
  • 4 IP camera channels
  • 4 built-in PoE ports, supplying data and power to cameras from the recorder
  • One hard drive bay
  • 4K, as per the model designation
  • AcuSense analytics at the recorder
  • PoE wattage and total budget, bandwidth, maximum supported drive capacity, decoding capacity, codecs, power draw and dimensions — full manufacturer datasheet available on request. Call 16454.

Compatibility

Works within the standard Hikvision ecosystem alongside Hikvision IP cameras and Hikvision management software. Cameras on the recorder’s own PoE ports normally sit on the recorder’s internal network segment rather than the building LAN — simpler to commission, and it also means anything else that must reach a camera needs a route planned. For mixed-brand cameras, ONVIF behaviour varies by firmware — send us the models and we will check.

What’s in the box

  • 1 x Hikvision DS-7604NXI-K1/4P network video recorder
  • Manufacturer-supplied accessories and documentation as packed by Hikvision
  • Assume nothing else — no drive, no leads, no bracket. Exact pack contents for the current revision are confirmed on the order

Common questions on this model

What do we actually do when the client wants a fifth camera?
Two options, both costly. Either a switch and a second small recorder go in beside this one, leaving the client searching two head ends for one incident, or this unit is replaced with an eight-port model such as the DS-7608NXI-K2/8P and the four leads move across. Cameras and cabling survive either way; the recorder does not.

If the recorder loses power, do the cameras stay up?
No. The cameras draw power from the recorder, so the two rise and fall together. That simplifies the UPS conversation — one thing to protect rather than two — but size it for the recorder and the camera load together.

Can the client reach a camera’s own web page from the office network?
Not by default. Cameras on the built-in ports sit behind the recorder rather than on the building network, and viewing is through the recorder. If a browser on the office LAN or a third-party system must reach a camera directly, design that in rather than add it later. Call 16454 with the topology before cabling.

Genuine Hikvision stock with the official one-year manufacturer warranty, delivered across Egypt. For datasheets, topology checks or project pricing, call 16454.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Hikvision 4-ch PoE 1U K Series AcuSense 4K NVR DS-7604NXI-K1/4P”

Your email address will not be published. Required fields are marked *